Digital moisture meter DMM-001

Digital moisture meter DMM-001

Codice Prodotto: DMM-001

Digital moisture meter DMM-001
You Save:
€30.19PCS (45%)

Disponibili: 1


Digital moisture meter DMM-001

Ideal for use in woodworking, building construction and agriculture industries. The DMM-001 is also an invaluable to the restoration field. Ideal for locating moisture in carpets and sub-flooring. Ultra-sensitive Digital Moisture Meter easily detects hidden leaks in wood, concrete, plaster and carpet. Providing accurate moisture level readings make this moisture meter great for new home inspections, locating roof leaks or even selecting dry lumber at the yard. Ideal to use in woodworking, building construction, agriculture restoration and floor-laying. Used to check wood, drywall and concrete before painting, sealing or treating and locate and identify water leaks in roofs, floors and walls. Display will show the moisture content in Percent Moisture Content directly. Ergonomically designed and CE approved.

Measuring range in wood:                      5~50%
Measuring range in building material:     1.5~33%
Measuring accuracy:                              ±2%
Backlight shut off:                                 In about 15 seconds
Auto power off:                                     3 minutes idle
Low battery indicator:                             <7V
Power supply:                                       a 9V battery block (6F22 or 6LR6)
Working current:                                   <25mA
Working temperature:                            0~50°C (32~122°F)
Working humidity:                                 <90%RH non-condensing
Storage:                                               -20~60°C (-4~140°F) ≤85% (without battery)
Dimensions:                                          145mm×62mm×27mm (5-11/16”×2-7/16”×1-1/16”)
Weight:                                                 About 86g (3oz) (without battery)


  1. Pull out protection cover, remove protection caps from the pins.
  2. Press power button to switch on tool. LOW LED will turn on, and LCD will display “_ _ _”. Default measuring mode is for wood. Press button MODE to switch material.
  3. Insert the two detection pins into the target material.
  4. Wood mode shows a moisture percentage between 5% and 50%. Below 5% screen will display "_ _ _", whereas over 50% screen will display "- - -".
  5. Building material mode shows a moisture percentage between 1,5% and 33%. Below 1,5% screen will display "_ _ _", whereas over 33% screen will display "- - -".
  6. Press HOLD button when measuring to store data. Press button again to deactivate function.
  7. Keep pressing HOLD button to turn off the buzzer sound when measuring.
  8. Keep pressing power button for 2 seconds to switch off tool.